Brother MFC J6910DW - Manual (Page 197)

USB cable scanning
190
12
Note
• If you choose color in the quality setting, you cannot choose TIFF.
• If you choose black and white in the quality setting, you cannot choose JPEG.
i
Press Black Start or Color Start to start scanning. If you are using the scanner glass, the LCD displays
Next Page?. Press Yes or No. After you finish scanning, make sure you choose No before removing
the USB Flash memory drive or memory card from the machine.
Note
Scan type depends on the settings you choose in step f to h, Black Start or Color Start does not
change the setting.
How to set a new default for Scan to Media
12
You can set your own default settings.
Setting the new default
12
a
Press (SCAN).
b Press a or b to choose Scan to Media.
Press OK.
c Press and choose your new setting. Repeat this step for each setting you want to change.
d After changing the last setting, press a or b to choose Set New Default.
Press OK.
e Press 1 to choose Yes.
f
Press Stop/Exit.
Factory reset
12
a
Press (SCAN).
b Press a or b to choose Scan to Media.
Press OK.
c Press a or b to choose Factory Reset.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.