Brother TD-2120N - Manual (Page 38)

Chapter 3
32
7 User ID/Password
You can only specify settings when LEAP,
EAP-FAST, EAP-TTLS or EAP-TLS is selected
as the authentication method. In addition, with
EAP-TLS, it is not necessary to register a
password, but a client certificate must be
registered. To register a certificate, connect to
the printer from a web browser, and then
specify the certificate. For details on using a
web browser, see Web Based (Web Browser)
Management (TD-2120N/2130N only)
on page 49.
8 Display the key and password on-screen
If this check box is selected, keys and
passwords will be displayed in plain text (non-
encrypted text).
Communication Modes and
Authentication Methods/Encryption
Modes
3
 When [Communication Mode] is set to
[Ad-hoc]
 When [Communication Mode] is set to
[Infrastructure]
Authentication
Method Encryption Mode
Open System None
WEP
Authentication
Method Encryption Mode
Open System None
WEP
Shared Key WEP
WPA-PSK TKIP
AES
WPA2-PSK AES
WPA/WPA2-PSK TKIP
AES
LEAP CKIP
EAP-FAST/NONE TKIP
AES
EAP-FAST/MS-CHAP
v2 TKIP
AES
EAP-FAST/GTC TKIP
AES
PEAP/MS-CHAPv2 TKIP
AES
PEAP/GTC TKIP
AES
EAP-TTLS/CHAP TKIP
AES
EAP-TTLS/MS-CHAP TKIP
AES
EAP-TTLS/MS-
CHAPv2 TKIP
AES
EAP-TTLS/PAP TKIP
AES
EAP-TLS TKIP
AES
To perform higher level security
settings:
When performing certificate verification
with EAP-FAST, PEAP, EAP-TTLS or
EAP-TLS authentication methods, the
certificate cannot be specified from the
Network Setting Tool. After the printer
has been set so that it can connect to
the network, specify the certificate by
accessing the printer from a web
browser.
For details on using a web browser, see
Web Based (Web Browser)
Management (TD-2120N/2130N only)
on page 49.
Authentication
Method Encryption Mode