beautypg.com

Brother MFC-820CW User Manual

Page 97

background image

Wireless installation for Windows

®

8 - 26

8

10

Refer to the instruction manual that came with your access point to set the SecureEasySetup

TM

mode

of your access point.

11

Put the machine in SecureEasySetup

TM

mode.

For MFC-640CW, press Menu/Set, 5, 3, 2 on the control panel.
For MFC-820CW: Press Menu,

or

for

LAN and press OK. Press

or

for

Setup WLAN and then

press OK. Press

or

for

SecureEasySetup and press OK.

Note

It will take approximately one minute for the LAN menu on the LCD to become available after the machine
restarts or is turned on.

12

Press Menu/Set.

Note

If the LCD shows Connection Error, please try again.

13

Click Next.

14

The configuration is finished. Relocate the machine to a location that is within range of your access point.

You have completed the wireless setup. A four level indicator of your machine’s LCD
represents the wireless signal strength. If you chose to install the drivers in

step 6,

go to step 15.

This manual is related to the following products: