Brother MFC-820CW User Manual
Page 89
Wireless installation for Windows
®
8 - 18
8
Note
The Default Node name of the NC-xxxx (where “xxxx” is your model name) is “BRW_xxxxxx” or
“BRN_xxxxxx” (where “xxxxxx” is the last six digits of Ethernet address).
13
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the access point you wish to
associate the machine with, and then click Next.
Note
•
If your target access point does not appear on the
list, you can manually add it by clicking the Add
button. Follow the on-screen instructions for
entering the Name (SSID) and the Channel
number.
•
“SETUP” is the default SSID of the machine. Do
not choose this SSID.
•
If the list is blank, check that the access point has
power, and then see if the machine and the
access point are within range for wireless
communication. Then, click Refresh.
14
If your network is not configured for Authentication
and Encryption, the following screen will appear. To
continue installation, click OK and