Brother MFC-820CW User Manual
Page 137

Wireless installation for Macintosh
®
9 - 27
9
9
Choose I’m not able to connect my device to my
access point with a network cable. Click Next.
10
If you are using a wireless computer, choose This
PC has wireless capability., and make sure I am
using an access point in infrastructure mode is
not checked. Click Next.
If you are using a wired computer, choose This PC
uses a network cable to connect to the wireless
network., and you must configure the wireless
settings from the control panel. Click Next and follow
the on-screen instructions to complete the setup.
See
Using the Setup Wizard from the control panel
LAN menu for a wireless network on page 3-3. When
finished, go to the driver installation in
11
Read the Important Notice.
For MFC-640CW: Press Menu/Set, 5, 6 on the
control panel, and then press
▲
or
▼
to choose WLAN.
Press Menu/Set. If Reboot OK? is displayed, press
1.Yes. The wired network interface will become
inactive with this setting. The machine will restart
automatically. After it restarts, check the box on the
screen and click Next.
For MFC-820CW: Press Menu on the control panel.
Press
▲
or
▼
for
LAN and press OK. Press
▲
or
▼
for
Network I/F and press OK. Press
▲
or
▼
for
WLAN
and press OK. If Reboot OK? is displayed, press 1
for
Yes. The wired network interface will become
inactive with this setting. The machine will restart