Brother MFC-820CW User Manual

Page 76

Wireless installation for Windows

8 - 5

Note

If you do not have a network cable, check I don’t have a
network cable and click Next. You will need to configure
the wireless settings from the control panel. Follow the
onscreen instruction to complete the setup. When the
setup is finished,

go to step 22 for driver installation.

(Continued from

step 8) If you choose This PC has

wireless capability., check I am using an access
point in infrastructure mode, and then click Next.

If you choose This PC uses a network cable to
connect to the wireless network., you must
configure the wireless settings from the control
panel. Click Next and follow the on-screen
instructions to complete the setup. See

Using the

Setup Wizard from the control panel LAN menu for a
wireless network on page 3-3. When finished, go to
the driver installation in

step 22.

Read the Important Notice.
For MFC-640CW: Press Menu/Set, 5, 6 on the
control panel, and then press

▲

▼

to choose WLAN.

Press Menu/Set. If Reboot OK? is displayed, press
1.Yes

. The wired network interface will become

inactive with this setting. The machine will restart
automatically. After it restarts, check the box on the
screen and click Next.

For MFC-820CW: Press Menu on the control panel.
Press

▲