Brother MFC-820CW - Manual (Page 78)

Wireless installation for Windows ®
8 - 7
8
12
To communicate with the un-configured wireless
machine, temporarily change the wireless settings
on your PC to match machine’s default settings
shown on this screen. Click Next.
13
If more than one wireless machine is available on
the network, the following list appears. If the list is
blank, check if the access point and the machine are
powered on, and then click Refresh. Choose the
machine you wish to configure, and click Next.
Note
The Default Node name of the NC-xxxx (where “xxxx” is your model name) is “BRW_xxxxxx” or
“BRN_xxxxxx” (where “xxxxxx” is the last six digits of Ethernet address).
14
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the access point you wish to
associate the machine with, and then click Next.
Note