Brother MFC-820CW - Manual (Page 90)

Wireless installation for Windows ®
8 - 19
8
15
If your network is configured for Authentication and
Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must
ensure that it is configured to match the
Authentication and Encryption settings of your
existing wireless network. Choose the
Authentication Method and Encryption Mode
from the pull-downs in each setting box. Then enter
the Network key and click Next.
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
16
Click Next. The settings will be sent to your
machine. The settings will remain unchanged if you
click Cancel.
Note
• If you want to manually enter the IP address settings of your machine, click Change IP Address and
enter the necessary IP address settings for your network. After making your selection, click Next and
the Wizard will search for available wireless networks.
• The control panel settings will be automatically changed to WLAN when the wireless settings are sent
to your machine.