Brother MFC-820CW User Manual
Page 139
Wireless installation for Macintosh
®
9 - 29
9
12
To communicate with the un-configured wireless
machine, change the wireless settings on your
Macintosh
®
to the machine’s default settings which
are shown on the screen. Click Next.
13
If more than one wireless machine is available on
the network, the following list appears. If the list is
blank, check if the machine is powered on, and then
click Refresh. Choose the machine you wish to
configure, and click Next.
Note
The Default Node name of the NC-xxxx (where “xxxx” is your model name) is “BRW_xxxxxx” (where “xxxxxx”
is the last six digits of Ethernet address).
14
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the Ad-hoc network you wish to
associate the machine with, and then click Next.
If no Ad-hoc wireless network are available, you
need to create a new wireless network.