Brother MFC-820CW - Manual (Page 157)

Appendix B
B - 4
B
Function table and default factory settings
(For MFC-640CW)
Level
one Level two Level three Options 1 Options 2 Factory settings
5.LAN 1.TCP/IP
(Wired) 1.BOOT Method Auto/ Static/ RARP/
BOOTP/ DHCP — Auto
2.IP Address 1.Change [000-255].[000-255].[000-255].[000-255] [169].[254].[001-254].
[000-255]
1
2.Exit — —
3.Subnet Mask 1.Change [000-255].[000-255].[000-255].[000-255] 255.255.0.0 2
2.Exit — —
4.Gateway 1.Change [000-255].[000-255].[000-255].[000-255] 000.000.000.000
2.Exit — —
5.Node Name 1.Change BRN_XXXXXX=
(last 6 figures of Ethernet address)
(up to 15 characters)
BRN_XXXXXX
2.Exit — —
6.WINS Config Auto/ Static — Auto
7.WINS Server Primary/ Secondary [000-255].[000-255].[000-255].[000-255] 000.000.000.000
8.DNS Server Primary/ Secondary [000-255].[000-255].[000-255].[000-255] 000.000.000.000
9.APIPA On/ Off — On
2.TCP/IP
(WLAN) 1.BOOT Method Auto/ Static/ RARP/
BOOTP/ DHCP — Auto
2.IP Address 1.Change [000-255].[000-255].[000-255].[000-255] [169].[254].[001-254].
[000-255]
1
2.Exit — —
3.Subnet Mask 1.Change [000-255].[000-255].[000-255].[000-255] 255.255.0.0 2
2.Exit — —
4.Gateway 1.Change [000-255].[000-255].[000-255].[000-255] 000.000.000.000
2.Exit — —
5.Node Name 1.Change BRW_XXXXXX=
(last 6 figures of Ethernet address)
(up to 15 characters)
BRW_XXXXXX
2.Exit — —
6.WINS Config Auto/ Static — Auto
7.WINS Server Primary/ Secondary [000-255].[000-255].[000-255].[000-255] 000.000.000.000
8.DNS Server Primary/ Secondary [000-255].[000-255].[000-255].[000-255] 000.000.000.000
9.APIPA On/ Off — On