Brother MFC-820CW User Manual
Page 87
Wireless installation for Windows
®
8 - 16
8
9
Read the Important Notice.
For MFC-640CW:Press Menu/Set, 5, 6 on the
control panel, and then press
▲
or
▼
to choose
Wired LAN
. Press Menu/Set. If Reboot OK? is
displayed, press
1.Yes. The wireless network
interface will become inactive with this setting. The
machine will restart automatically. After it restarts,
check the box on the screen and click Next.
For MFC-820CW: Press Menu on the control panel.
Press
▲
or
▼
for
LAN and press OK. Press
▲
or
▼
for
Network I/F and press OK. Press
▲
or
▼
for
Wired LAN and press OK. If Reboot OK? is displayed, press 1 for Yes. The wireless network interface
will become inactive with this setting. The machine will restart automatically. After it restarts, check the
box on the screen and click Next.
If Accepted is displayed, press Stop/Exit. Check the box and click Next.
Note
It will take approximately one minute for the LAN menu on the LCD to become available after the machine
restarts or is turned on.
For configuration, you must temporarily connect
your Brother wireless device directly to a free port on
your access point, hub or router using a network
cable.
When the following screen appears, open the
scanner cover to its open position. Insert the network
cable to the access point and then to the machine.
You will find the LAN socket above and to the left of
the ink cartridge slots, as shown. Click Next and