ROTRONIC LOG-HC2 Universal Datalogger - Manual (Page 49)

49
Online
For recurring applications in Online, Templates assist in se-
lecting the required sensors and adjusting the display to suit .
Create template: Start Online and select the required sen-
sors . Select Next> . Use
Graph > Properties,
Graph > Grid line,
Graph > Legend and
Graph > Start time to change the way the curve is dis-
played . Via Back return to the trace display . Interrupt record-
ing with Stop . Save the template via File > Save as tem-
plate .
Apply the template to Online: File > Use template and
select the required template (*mse) .
Once recording has finished by clicking on Stop, the recorded
measurement parameters can be saved via File > Save as .
In the menu View the measurement parameters can be dis-
played as curves with Graph or as numerical values with
Monitor . The font displayed on the monitor can be selected
via the menu Monitor > Font .
Once recording has finished by clicking on Stop, the record-
ed measurement parameters and traces can be deleted via
Clear .
The display can be changed via Properties, Gridlines, Leg-
end and Start time .
Select the frequency ( Refresh rate) with which measurement
parameters are to be transferred to the PC .
In the Time window you can define the time period repre-
sented by the time axis .