ROTRONIC LOG-HC2 Universal Datalogger - Manual (Page 21)

21
Setup
Reader
V
iewer
Online
Overview
External processing of logger data is carried out using the LOG PC software pro-
grams Setup, Reader, Viewer and Online . The LOG PC programs can be used
for all logger types .
The Setup enables the properties of the logger to be customised to user’s re-
quirements .
The Reader allows the user to transfer measurement parameters to a Windows
PC . The Viewer is used to display data graphically or in table form or to export it
as a text file (* .csv) .
With the help of Online (and the built-in display) users can view measurement
parameters and curves “live” on a PC .
Installation of the LOG PC software on a PC
For installation you will require Windows administrator rights .
Insert the CD containing the LOG PC software into the computer’s CD-ROM
drive . The installation procedure starts automatically* .
Completing installation
Initial installation: Select
Install USB driver .
Click on
Finish .
The logger symbol appears on screen .
If the PC is not set up for automatic installation, proceed as follows:
1 . Click
Start > Run
2 . Click Find > Look in: (set to CD drive) .
3 . Select the file Install_LOG_HC2.exe and Open .
4 . In the Run dialog box click OK .
5 . The installation process will begin .
6 . Follow the instructions and select: Run LOG-program now .
7 . During the initial installation select Install USB driver . See above, Complet-
ing installation .
PC software
* The program "Inno Setup" for installing the logger PC programs was written by Jordan Russell (www .jrsoftware .org, copyright Jordan
Russell) .