ROTRONIC LOG-HC2 Universal Datalogger - Manual (Page 34)

34
Setup
Adjusting the channel properties
Select the tab Channels 3 in order to change the name, unit, display format and
calibration of a channel .
The following options are available (see following schematic):
• Change basic parameter (see page 36)
Changing the factory settings (name, unit, display format) .
This information is used for calibration purposes among others .
• Calibration (see page 37)
Correction of the displayed values .
• Change display parameter (see page 38)
Change the factory settings or the information entered under Change basic
parameter .
This information is used for the logger and PC display .