User settings, Setup user settings, Caution – ROTRONIC LOG-HC2 Universal Datalogger User Manual
Page 33

33
Setup
User settings
To display the configuration saved in the logger select the Basic settings tab 1
and click
Read basic settings . The settings are now displayed in the User set-
tings tab .
CAUTION
The changes made in the
User settings tab
and its sub-menus will only be transferred to
the logger after clicking
Write user settings 2 .
Enter the name
of the logger
Enter date of last calibration
and comment
Check the checkbox in order to enter/change the date, notes
and „Calibrating the sensors“ on page 34 .
Only for analogue inputs: Input of a "warm-up time" to warm-
up analogue sensors before making measurements . A start-up
time of zero = the sensor voltage is always ON
.
1
2