NORD Drivesystems BU0090 User Manual
Page 24
NORDAC AS-Interface Manual
24
BU
0090
GB
M12 round connector for connecting sensors/actuators and options/slaves to the AS interface cable
M12 x 1 round plug connectors are supplied and distributed by many manufacturers of industrial applications.
When selecting the components, special attention should be paid to application-specific requirements, e.g.
Type of connection, number of pins (4 or 5-pin)
Plug and socket coding, straight or angled design etc.
Tightening torque and special tools from the manufacturer
Cable length, cable quality and material
Protection
class
(IPxx)
Quick-fit connection and/or securing against vibration
M12 - torque wrench for connecting M12 round connectors
The M12 torque wrench set is used to check the optimum tightening torque of M12 round connectors. The
torque wrench is calibrated to the optimum tightening torque is 0.6Nm.
Supplier
Designation
Part no.
MURR Elektronik
M12 wrench set for M12 round connectors with calibrated
torque of 0.6Nm
7000-99102-0000000
NOTE
In order to ensure a secure, sealed and vibration-proof connection, connecting components with
hexagonal fittings should be used.
After the completion of installation work, all M12 round connectors must be tightened to a torque
of 0.6Mn using an M12 installation wrench.
M12
installation wrench
SW13
Torque handle