NORD Drivesystems BU0590 User Manual

Page 7

1 Introduction

BU 0590 GB-0312

Subject to technical amendments

1.3 Delivery

Check the equipment immediately after delivery/unpacking for transport damage such as deformation or
loose parts.
If there is any damage, contact the carrier immediately and carry out a thorough assessment.

Important! This also applies even if the packaging is undamaged.

1.4 Scope of supply

SK TU3-PNT*

PROFINET Bus module for SK 500E frequency inverters

IP20

*incl. screw for optional fixing to the FI

1.5 Certifications

1.5.1

European EMC Directive

If NORD frequency inverters or their options are installed according to the
recommendations in this instruction manual, it meets all EMC directive
requirements, as per the EMC product standard for motor-operated systems
EN 61800-3.

1.5.2

RoHS compliance

The bus options described here are designed to be RoHS compliant
according to Directive 2002/95/EEC

1.6 Identification System

SK TU3-PNT

Bus system:

AS1 = AS-Interface, CAN = CAN, CAO = CANopen,

ECT = EtherCAT®, PNT = PROFINET®, etc.

Device series:

SK TU1 / SK TU2 / SK TU3 / SK TU4

Fig. 1 Type Codes