NORD Drivesystems BU0590 - Manual (Page 41)

Fehler! Verweisquelle konnte nicht gefunden werden.Fehler! Verweisquelle konnte nicht gefunden werden.
BU 0590 GB-0312 Subject to technical amendments 41
Parameter
{Factory setting}
Setting value / Description / Note Device Supervisor Parameter set
P547
Function Bus setpoint 2
(Function of bus - setpoint 2)
up to
SK 535E
S P
0 ... 55
{ 0 }
This parameter is identical to P546.
P548
Function Bus setpoint 3
(Function of bus - setpoint 3)
up to
SK 535E
S P
0 ... 55
{ 0 }
This parameter is identical to P546.
5.2.2 Information parameters
Access: Read only
Parameter Setting value / Description / Note Device
Parameter
type
P740 [-01]
...
[-13]
PZD bus in
(Process data bus in)
up to
SK 535E
S
[-01] = Control word
Control word, source from
P509.
[-02] = Actual bus value 1
[-03] = Actual bus value 2
[-04] = Setpoint 3
Setpoint data from main
setpoint (P510 [-01]).
[-05] = Bus I/O In Bits (P480)
The displayed value depicts all
Bus In Bit sources linked with
or
.
[-06] = Parameter data In 1
[-07] = Parameter data In 2
[-08] = Parameter data In 3
[-09] = Parameter data In 4
[-10] = Parameter data In 5
Data during parameter transfer:
Order label (AK),
Parameter number (PNU),
Index (IND), Parameter value
(PWE 1/2)
0000 ... FFFF (hex) This parameter informs
about the actual control
word and the setpoints that
are transferred via the bus
systems.
For display, a BUS system
must be selected in P509
[-11] = Setpoint 1
[-12] = Setpoint 2
[-13] = Setpoint 3
Setpoint data from the master
function value (Broadcast), if
P509 = 9/10
(P510 [-02])