NORD Drivesystems BU0570 User Manual
Page 7
1 Introduction
BU 0570 GB-0312
Subject to technical amendments
7
1.3 Delivery
Check the equipment immediately after delivery/unpacking for transport damage such as deformation or
loose parts.
If there is any damage, contact the carrier immediately and carry out a thorough assessment.
Important! This also applies even if the packaging is undamaged.
1.4 Scope of supply
SK TU3-ECT*
EtherCAT bus module for SK 5xxE frequency inverters
IP20
*incl. screw for optional fixing to the FI
1.5 Certifications
1.5.1
European EMC Directive
If NORD frequency inverters or their options are installed according to the
recommendations in this instruction manual, it meets all EMC directive
requirements, as per the EMC product standard for motor-operated systems
EN 61800-3.
1.5.2
RoHS compliance
The bus options described here are designed to be RoHS compliant
according to Directive 2002/95/EEC
1.6 Identification System
SK TU3-ECT
Bus system:
AS1 = AS-Interface, CAN = CAN, CAO = CANopen,
ECT
=
EtherCAT®
, PNT = PROFINET®, etc.
Device series:
SK TU1 / SK TU2 / SK TU3 / SK TU4
Fig. 1 Type Codes