Dwyer 2600 - Manual (Page 49)

May, 2013 Page 49 of 52 949-1194 Rev. 7
INPUT RANGES
INPUT TYPE RANGE °F RANGE °C
Type J or L 1 Thermocouple -100 to +1607 -73 to +871
Type K 1 Thermocouple -200 to +2500 -129 to +1371
Type T 1 Thermocouple -350 to +750 -212 to +398
Type E 1 Thermocouple -100 to +1800 -73 to +982
Type R Thermocouple 0 to 3200 -17 to +1760
Type S Thermocouple 0 to 3200 -17 to +1760
Type B Thermocouple +75 to +3308 +24 to +1820
Type C Thermocouple 0 to 4208 -17 to +2320
Type N 1 Thermocouple -100 to +2372 -73 to +1300
100 Ω Plt. 0.00385 DIN 1 RTD -328 to 1607 -200 to +875
100 Ω Plt. 0.00392 NIST 1 RTD -328 to 1607 -200 to +875
120 Ω Nickel 0.00628 US 1 RTD -112 to +608 -80 to +320
1000 Ω Plt. 0.00385 DIN 1 RTD -328 to +1607 -200 to +875
Current/Voltage/Δ Voltage 2 Scalable Units from -1999 to +9999
1 These Input Types can be set for 0.1° display. If temperature goes above 999.9° or less
than -199.9° the display will return to whole degree resolution.
2 The 0 to 20 mADC, 4 to 20 mADC, 0 to 10 VDC, 2 to 10 VDC, and -10 to +10 mVDC
inputs are fully scalable from a minimum of 100 counts span placed anywhere within the
within the range of -1999 to +9999. Decimal point position is adjustable from the zero
place (9999), tenths (999.9), hundredths (99.99), thousandths (9.999), or ten
thousandths (.9999).