Badger Meter Fluid Management System - Manual (Page 48)

Initialize All Option
The Initialize All option initializes all parts of the system . This is the option to use for the first initialization .
Initialize Changes Option
The Initialize Changes option initializes only the changes made since the last initialization .
After clicking the appropriate button, you will be reminded that everything currently on the keypads will be erased . Click YES
to continue or NO to go back . The initialization process may take several minutes . Upon completion, a Request Completed
screen displays .
After the system is initialized, if changes are made to the system configuration it will be necessary to initialize those changes
before the system can be used . You will not be allowed to make changes to the system if there are pending work orders .
To initialize only the changes, click the INITIALIZE
CHANGES button . Any items that are highlighted
in red did not initialize properly and it will be
necessary to determine what is wrong . All custom
settings initiated by the supervisor user will
be erased .
On the right-hand side is the log of all Master
Keypad communications during an initialization
or communications test . To clear this log, click the
CLEAR LOG button .
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 48 July 2014