Badger Meter Fluid Management System - Manual (Page 39)

USING THE FMS SOFTWARE
Setting Up New Users
The default names and pins may be changed at any time by highlighting the text, deleting it, and entering the appropriate
text . To save changes made, click the SAVE button .
1 . To add a new user, click the RESET button .
The information will clear from the text boxes .
2 . Enter a user name, new pin (cannot duplicate
any currently used pin number), and assign a
role .
If you wish to set up a user having multiple roles,
you will need to create a user and pin number for
each role .
New User Roles
The choices for role selection are System Admin, Supervisor, Parts Dept, and Dispense . These choices will allow the user to do
the following:
System Admin Make changes to all levels of the software, from the PC only .
Supervisor Make changes at the keypad only .
Parts Dept Enter work orders at the PC .
Dispense Enter a work order id at dispense keypad to complete dispense . .
Active or Inactive Users
Only users who have an Active status will be allowed to access their respective duties .
To make a user active or inactive:
1 . Select the user's name .
2 . Check the Active box .
3 . Click SAVE .
Users with multiple roles will require a unique password for each role.
Deleting a User
To delete a user:
1 . Select the user's name .
2 . Click the DELETE USER button in the top left-hand corner .
3 . Confirm your request to delete the user .
User Manual
Page 39 July 2014