Badger Meter Fluid Management System - Manual (Page 38)

Launching the FMS Software
To launch the software, click on the FMS Client icon on your desktop
Before you can begin, you first need to tell the Client application the IP address where the server resides .
1 . Enter the IP address of the FMS server .
For the Client installed on the server, the IP address should be 127 .0 .0 .1 .
For the Client not installed on the server, enter the IP address assigned to the
server .
FMS System Configuration
2 . Enter the 4-digit system password and click the OK button .
The system admin password is initially set to 0000 .
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 38 July 2014