Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 9)

PROGRAM STARTUP AND EXIT
NOTE: N Before using the handheld for the first time, see "Initial Setup" on page 60 in Part II to ensure that the device is set up
correctly and the battery is charged
1 Press the green power key on the keypad to turn on the handheld
2 At the home screen, tap the Windows® Start button
in the lower left corner
Result: In Admin mode, the program icons display as
shown in Figure 3.
If the handheld is in Kiosk mode, skip to step 5.
For more information about Kiosk mode, see "Software
Security Modes" on page 8 .
Figure 2: windows home
3 Tap the folder labeled Badger Field Applications
Result: The Badger Field Applications folder opens.
The folder includes the ORION Field Application along
with any other programs loaded on the handheld.
NOTE: N Tap a program icon once to make a
selection To rearrange the icons on the
screen, touch, hold and drag the icon to the
location you prefer
Figure 3: Badger Field Applications folder
NOTE: N Badger Field Applications includes a
suite of meter reading software products
This manual includes descriptions and
instructions for using the ORION Field
Application software
4 Tap the ORION Field Application icon
Result: The selection screen opens. See Figure 5.
Figure 4: ORION Field Application
Windows
Start
PROgRAM STARTuP ANd ExIT
Page 9 April 2014 ORION® Field Application for Trimble® Ranger 3