Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 56)

VersaProbe Quick Read
A VersaProbe wand is used for close proximity touch pad meter reading The wand can be connected to the handheld serial
port or via a wireless Bluetooth connection
Setting the VersaProbe COM Port
Check the COM port settings before performing a VersaProbe touch pad reading For instructions, see "VersaProbe Reads"
on page 20
Performing a VersaProbe Quick Read
To perform a Quick Read using the VersaProbe wand, follow these steps
1 Tap VersaProbe on the Program & Quick Read Main Menu See "Program & Quick Read" on page 55 for additional
information if you need help
Result: The VersaProbe screen opens as shown in Figure 106.
-
Figure 106: VersaProbe Main
2 Align the end of the VersaProbe wand with the touch pad Then squeeze and release the trigger to capture
the reading
Result: A reading is displayed, along with the time of the last read, as shown in Figure 107.
Figure 107: Quick Read completed
3 Tap Close to return to the Program & Quick Read Main Menu
PROgRAM & QuIcK REAd
Page 56 April 2014 ORION® Field Application for Trimble® Ranger 3