Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 71)

Power:
• Tap if you want to select "Maintain Bluetooth
connections when device is turned off "
• Tap if you want to select "Allow Bluetooth activity to
turn the device on " When this check box is selected,
another Bluetooth device can send data and your
unit will turn on and reply if necessary
IMNOOTAO I
Leaving wireless options on reduces battery life. It is
recommended that your handheld be configured to
automatically turn off when not in use. Otherwise, another
Bluetooth device could turn on your handheld, transfer
data, and if it does not turn off again, drain the battery.
NOTE: N To set up a VersaProbe Bluetooth connection, see "using VersaProbe with Bluetooth" on page 88
Receiving Beams
If you want to allow the unit to receive incoming beams, go to Windows Start> Settings> Connections> Beam and check
the box for "Receive all incoming beams "
TRIMBLE RANgER 3 hANdhELd OVERVIEw
Page 71 April 2014 ORION® Field Application for Trimble® Ranger 3