Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 43)

Reader Codes
Reader Codes are predefined by the reading data
management software operator The codes are often used to
describe typical, non-emergency account information such
as, “make an appointment” or “left a notice card ”
Up to three Reader Codes may be set for an account
1 Tap Reader Codes on the Comments Menu
Result: The Reader codes screen displays with the
customer name and address shown.
2 Tap 1, 2 or 3 to enter the 1st, 2nd and/or 3rd
code, respectively
Result: A list of available codes display. This list is
generated by reading data management software
operator prior to loading a route.
3 Use the arrow keys to move up and down to
highlight the desired code
4 Tap to select the desired code or use the optional
Search Text function to find a code Up to 99
Reader Codes may be defined by the reading data
management software operator
5 When the desired code is highlighted, tap Select to
accept the code and return to Reader Codes
6 Repeat steps 2 through 5 to attach another
Reader Code to the account or tap OK to accept
the selected code(s) and return to the Comments
Menu Tap Cancel to return to the Comments Menu
without saving a code
7 Tap Close on the Comments Menu to return to the
Read Menu Tap Close on the Read Menu to return
to the account read screen
Figure 76: Reader codes screen
Figure 77: Select Reader code
Trouble Codes
Use Trouble Codes when urgent attention is required
Trouble Codes are defined by the reading data management
software operator The process to enter Trouble Codes is
similar to Reader Codes, however only one Trouble Code
may be attached to an account
1 Tap Trouble Codes on the Comments Menu
2 Tap 1
Result: A list of available trouble codes displays.
3 Use the arrow keys to move up and down to
highlight the desired code, then tap Select
4 Tap OK to accept the code and return to the
Comments Menu Tap Cancel to return to the
Comments Menu without saving a code
Figure 78: Trouble codes screen
REAd MENu
Page 43 April 2014 ORION® Field Application for Trimble® Ranger 3