Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 87)

UNLOADING A ROUTE
1 Start at the Copyright screen If you need help, see "copyright Screen" on page 12
2 Insert the memory stick into the USB port on the
bottom of the handheld
Result: Inserting the memory stick triggers the Load &
Unload button to display next to the Trademarks and
License buttons on the copyright screen.
3 Tap the Load & Unload button
Result: The Load & unload Routes screen opens and
displays the route to unload.
4 Tap in the box that shows "Unload Current Route" to
unload the route from the handheld to the
memory stick
Result: The route unloads automatically and the route
information is no longer displayed on the screen.
5 Tap Done
Result: The copyright screen shows the date and time
of the unload.
6 Remove the memory stick from the handheld
NOTE: N When trying to unload a route from the
handheld, the memory stick should be
empty – no other route info should be on
the stick
For additional information, see
"Route
unload Error" on page 91
uNLOAdINg A ROuTE
Page 87 April 2014 ORION® Field Application for Trimble® Ranger 3