Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 66)

Changing the Handheld Date and Time
IMNOOTAO I
The date and time on the Trimble Ranger 3 handheld must be accurate to ensure communication with the ORION
endpoints. Check the date and time and adjust if necessary before reading a route.
To change the time and /or date, follow these steps:
1 Tap the Windows Start button at the lower left of the screen
2 Tap Settings
3 Tap Clocks & Alarms
4 Select the correct time zone, time and/or date by tapping the appropriate field and using the up/down arrows to
make any necessary changes
5 Once finished, tap OK
Result: A small window opens allowing changes to be saved.
6 Tap Yes to save the changes or No to close the screen without saving the changes Tap Cancel to return to Clocks &
Alarms to make additional changes
Result: The changes are saved when you tap Yes. clocks & Alarms will close and the Settings screen is displayed.
NOTE: N You can also change the time/date by tapping the top tool bar whenever the time is shown See step 7 in
"Program Startup and Exit" on page 9 for details
TRIMBLE RANgER 3 hANdhELd OVERVIEw
Page 66 April 2014 ORION® Field Application for Trimble® Ranger 3