Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 25)

Requesting Firmware Version Manually
If a work item was not assigned by the reading data management operator, you can manually initiate a request for the
firmware version from the current ORION Migratable (or Fixed Network in mobile mode) endpoint by performing the
following steps
1 Tap the Work Items button on the account read
screen for an ORION ME account
Result: The work Items screen opens.
NOTE: N If a work item is set to be performed
automatically, the message says “Assigned”
and the Collect button is inactive
Figure 32: Extended status
2 Tap to select Firmware Version Then tap Collect
Result: ”In Process“ displays next to the Firmware Version field as data collection begins. See Figure 33.
”complete“ displays when data collection is finished and the View button becomes active. See Figure 34.
Figure 33: In process Figure 34: complete
REAdINg A ROuTE
Page 25 April 2014 ORION® Field Application for Trimble® Ranger 3