KROHNE MFC 400 FOUNDATION FIELDBUS - Manual (Page 68)

4
OPERATION
68
MFC 400
www.krohne.com 11/2013 - 4003221901 - AD MFC 400 FF R01 en
SENSOR_NAME SENSOR_NAME SENSOR_NAME SENSOR_NAME
Sensor Type
R (Fct. C1.6.1) -
SENSOR_ SENSOR_ SENSOR_ SENSOR_
REVISION REVISION REVISION REVISION
Sensor Revision
R (Fct. B3.7, C6.1.4) -
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Transducer
Directory Entry
A directory that specifies the number and starting indices of
the data collections in the transducer block.
0
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
TYPE TYPE TYPE TYPE
Transducer Type
R Identifies the transducer that follows. Other
TWO_PH_ TWO_PH_ TWO_PH_ TWO_PH_
THRESHOLD THRESHOLD THRESHOLD THRESHOLD
2 Ph. Threshold
R/W Sets the threshold for activation of the 2-phase signal error
message (Fct. C1.5.3).
0.0
Settings:
0.0...1000.0
USER_INTERFACE USER_INTERFACE USER_INTERFACE USER_INTERFACE
UI SW Version
Displays UI SW version of electronics (Fct. D2.3.4).
IDENT_NUMBER
Ident. number
R Identification number -
ELECTRONIC_REV
Electronic Revision
R Electronic Revision -
PRODUCTION_
DATE
Production date
R Production date -
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Transducer
Directory Entry
A directory that specifies the number and starting indices of
the data collections in the transducer block.
0
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
TYPE TYPE TYPE TYPE
Transducer Type
R Identifies the transducer that follows. Other
V_NO_ V_NO_ V_NO_ V_NO_
CONVERTER CONVERTER CONVERTER CONVERTER
V No. Converter
R Displays the order number of the signal converter (Fct. C1.6.9,
C6.1.5).
-
V_NO_SENSOR V_NO_SENSOR V_NO_SENSOR V_NO_SENSOR
V No. SENSOR
R Displays the order number of the flow sensor (Fct. C1.6.7,
C6.1.2).
-
XD_ERROR XD_ERROR XD_ERROR XD_ERROR
Transducer Error
One of the transducer error codes defined in the FF
Transducer Specifications in section "4.7 Block Alarm
Subcodes".
0
Settings:
• 16: Unspecified error
• 17: General error
• 18: Calibration error
• 19: Configuration error
• 20: Electronics Failure
• 21: Mechanical Failure
• 22: I/O Failure
• 23: Data Integrity Error
• 24: Software Error
• 25: Algorithm Error
V_NO_SENSOR V_NO_SENSOR V_NO_SENSOR V_NO_SENSOR
V no. sensor
R Displays the order number of the flow sensor (Fct. C1.6.6). -
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value