KROHNE MFC 400 FOUNDATION FIELDBUS - Manual (Page 31)

OPERATION
4
31
MFC 400
www.krohne.com 11/2013 - 4003221901 - AD MFC 400 FF R01 en
FORMAT_2P_1L FORMAT_2P_1L FORMAT_2P_1L FORMAT_2P_1L
Form. 2.Page 1.Line
R/W No. of decimal places for 1st line of 2nd page (Fct. C6.4.2). X.X
Setting:
#X. / #X.X / #X.XX / #X.XXX / #X.XXXX / #X.XXXXX /
#X.XXXXXX / #X.XXXXXXX / #X.XXXXXXXX / automatic
FORMAT_2P_2L FORMAT_2P_2L FORMAT_2P_2L FORMAT_2P_2L
Form. 2.Page 2.Line
R/W No. of decimal places for 2st line of 2nd page (Fct. C6.4.4). X.X
Setting:
#X. / #X.X / #X.XX / #X.XXX / #X.XXXX / #X.XXXXX /
#X.XXXXXX / #X.XXXXXXX / #X.XXXXXXXX / automatic
FORMAT_2P_3L FORMAT_2P_3L FORMAT_2P_3L FORMAT_2P_3L
Form. 2.Page 3.Line
R/W No. of decimal places for 3st line of 2nd page (Fct. C6.4.5). X.X
Setting:
#X. / #X.X / #X.XX / #X.XXX / #X.XXXX / #X.XXXXX /
#X.XXXXXX / #X.XXXXXXX / #X.XXXXXXXX / automatic
IO_CONNECTION IO_CONNECTION IO_CONNECTION IO_CONNECTION
Status IO Connection
R/W Defines the influence of the diagnostic ''Electronic : IO
Connection'' (FD_xx_14) to the TB measurements status (Fct.
C1.5.14).
Information
Setting:
Information / Maintenance Required / Function Check / Out Of
Specification / Failure
PASSWRD PASSWRD PASSWRD PASSWRD
Password
R/W Password to activate access rights to restricted parameters. 0
POWER_FAILURE POWER_FAILURE POWER_FAILURE POWER_FAILURE
Status Power Failure
R/W Defines the influence of the diagnostic ''Electronic : Power
Failure'' (FD_xx_8) to the TB measurements status (Fct.
C1.5.13).
Information
Setting:
Information / Maintenance Required / Function Check / Out Of
Specification / Failure
PROTECT_INFO PROTECT_INFO PROTECT_INFO PROTECT_INFO
Access protection
R Current protection level to restricted parameters. Production
Setting:
Concentration / bit 5…6: not use / User / Service level /
Production / Custody Transfer / Write Lock
SERIAL_NUMBER SERIAL_NUMBER SERIAL_NUMBER SERIAL_NUMBER
Serial Number
R Device serial number, serial number of the system. Current serial
number
SIGNAL_LOW SIGNAL_LOW SIGNAL_LOW SIGNAL_LOW
Status Signal Low
R/W Defines the influence of the diagnostic ''Process : Signal Low''
(FD_xx_11) to the TB measurements status (Fct. C1.5.7).
Information
Setting:
Information / Maintenance Required / Function Check / Out Of
Specification / Failure
SIGNAL_SEARCH SIGNAL_SEARCH SIGNAL_SEARCH SIGNAL_SEARCH
Status Signal Search
R/W Defines the influence of the diagnostic ''Process : Signal
Search'' (FD_xx_13) to the TB measurements status (Fct.
C1.5.8).
Information
Setting:
Information / Maintenance Required / Function Check / Out Of
Specification / Failure
SYSTEM_CONTROL SYSTEM_CONTROL SYSTEM_CONTROL SYSTEM_CONTROL
Status System Control
R/W Defines the influence of the diagnostic ''Process : System
Control'' (FD_xx_9) to the TB measurements status (Fct.
C1.5.11).
Information
Setting:
Information / Maintenance Required / Function Check / Out Of
Specification / Failure
SW_SIMULATE SW_SIMULATE SW_SIMULATE SW_SIMULATE
SW simulate
R/W Enable/disable simulation like simulate Hardware jumper. Disable
Setting:
Disable / Active
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value