KROHNE MFC 400 FOUNDATION FIELDBUS - Manual (Page 57)

OPERATION
4
57
MFC 400
www.krohne.com 11/2013 - 4003221901 - AD MFC 400 FF R01 en
CONC2_CCF03 CONC2_CCF03 CONC2_CCF03 CONC2_CCF03
CONC2_CCF03
R/W Temperature coefficient for product A (Fct. C2.5.3). 0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF04 CONC2_CCF04 CONC2_CCF04 CONC2_CCF04
CONC2_CCF04
R/W Temperature coefficient squared for product A (Fct. C2.5.4). 0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF05 CONC2_CCF05 CONC2_CCF05 CONC2_CCF05
CONC2_CCF05
R/W Defines product B (Fct. C2.5.5). 0:Pure Water
Settings:
0:Pure Water / 1:Town Water / 2:Other
CONC2_CCF06 CONC2_CCF06 CONC2_CCF06 CONC2_CCF06
CONC2_CCF06
R/W Density of product B (Fct. C2.5.6). 0.0 g/cm³
Settings:
-9.0E7…9.0E7 g/cm³
CONC2_CCF07 CONC2_CCF07 CONC2_CCF07 CONC2_CCF07
CONC2_CCF07
R/W Temperature coefficient for product B (Fct. C2.5.7). 0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF08 CONC2_CCF08 CONC2_CCF08 CONC2_CCF08
CONC2_CCF08
R/W Temperature coefficient squared for product B (Fct. C2.5.8). 0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF09 CONC2_CCF09 CONC2_CCF09 CONC2_CCF09
CONC2_CCF09
R/W Define non-linear equation if CCF09 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.5.9).
0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF10 CONC2_CCF10 CONC2_CCF10 CONC2_CCF10
CONC2_CCF10
R/W Define non-linear equation if CCF10 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.5.10).
0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF11 CONC2_CCF11 CONC2_CCF11 CONC2_CCF11
CONC2_CCF11
R/W Define non-linear equation if CCF11 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.5.11).
0.0
Settings:
-9.0E7…9.0E7
CONC2_CCF12 CONC2_CCF12 CONC2_CCF12 CONC2_CCF12
CONC2_CCF12
R/W Define non-linear equation if CCF12 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.5.12).
0.0
Settings:
-9.0E7…9.0E7
CONC2_ CONC2_ CONC2_ CONC2_
FUNCTION FUNCTION FUNCTION FUNCTION
Conc.2 Function
R/W Sets the concentration measurement required (Fct. C2.3.1). 1:Off
Settings:
1:Off / 2:Brix / 3:% Mass / 8:% Volume / 4:Baume 144 /
5:Baume 145 / 6:% NaOH / 7:Plato / 9:API / 10:% Alcohol by
mass / 11:% Alcohol by volume
CONC2_OFFSET CONC2_OFFSET CONC2_OFFSET CONC2_OFFSET
Conc.2 Offset
R/W Additional offset for the concentration measurement. Can be
used to correct for differences between the measured and the
reference value (Fct. C2.3.2).
0.0 %
Settings:
-100.0…100.0 %
CONC2_PRODUCT CONC2_PRODUCT CONC2_PRODUCT CONC2_PRODUCT
Conc.2 Product
R/W Defines which general concentration product is displayed (Fct.
C2.3.3).
0:% Of Product A
Settings:
0:% Of Product A / 1:% Of Product B
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Transducer
Directory Entry
A directory that specifies the number and starting indices of
the data collections in the transducer block.
0
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value