Operation – KROHNE MFC 400 FOUNDATION FIELDBUS User Manual

Page 25

OPERATION

MFC 400

www.krohne.com

11/2013 - 4003221901 - AD MFC 400 FF R01 en

FD_RECOMMEN_ACT

This parameter is a device enumerated summarization of the

most severe condition or conditions detected. The DD help

should describe by enumerated action, what should be done to

alleviate the condition or conditions.

Uninitialized

Setting:

(0):Not Initialized / (1):No Action Required / (2):Remove

Simulate Jumper! / (1)(01)(00):Keys can be used 60 sec. after

removal of optical interface. / (1)(01)(01):Check configuration

settings of display line 2. / (1)(01)(02):Check configuration

settings of display line 1. / (1)(01)(06): Set MODE_BLK.TARGET

at RB to AUTO / (1)(01)(07): Check Fieldbus Terminal and

Connection / (1)(01)(11): No action required / (1)(01)(13): No

action required / (1)(01)(14): No action required / (1)(01)(15):

No action required / (1)(01)(31): No action required /

(1)(02)(20): Select another measuement for meas. page 2. /

(1)(02)(21): Select another measuement for meas. page 1. /

(1)(02)(28): Select another measuement for IO B or activate

diagnosis meas. / (1)(02)(29): Select another measuement for

IO B or activate diagnosis meas. / (1)(02)(30): Select another

measuement for IO A or activate diagnosis meas. / (1)(02)(31):

Select another measuement for IO A or activate diagnosis

meas. / (1)(03)(00):reserved / (1)(04)(00):reserved /

(1)(05)(00):reserved / (1)(06)(00):reserved /

(1)(07)(00):reserved / (1)(08)(00):reserved / (1)(09)(31):no

action required / (1)(10)(00):reserved / (1)(11)(31):Check for

entrained gas or viscosity of product. /

Parameter

Parameter
DD name

Access

Description and settings

Initial Value