KROHNE MFC 400 FOUNDATION FIELDBUS - Manual (Page 56)

4
OPERATION
56
MFC 400
www.krohne.com 11/2013 - 4003221901 - AD MFC 400 FF R01 en
CONC1_CCF05 CONC1_CCF05 CONC1_CCF05 CONC1_CCF05
CONC1_CCF05
R/W Defines product B (Fct. C2.4.5). 0:Pure Water
Settings:
0:Pure Water / 1:Town Water / 2:Other
CONC1_CCF06 CONC1_CCF06 CONC1_CCF06 CONC1_CCF06
CONC1_CCF06
R/W Density of product B (Fct. C2.4.6). 0.0 g/cm³
Settings:
-9.0E7…9.0E7 g/cm³
CONC1_CCF07 CONC1_CCF07 CONC1_CCF07 CONC1_CCF07
CONC1_CCF07
R/W Temperature coefficient for product B (Fct. C2.4.7). 0.0
Settings:
-9.0E7…9.0E7
CONC1_CCF08 CONC1_CCF08 CONC1_CCF08 CONC1_CCF08
CONC1_CCF08
R/W Temperature coefficient squared for product B (Fct. C2.4.8). 0.0
Settings:
-9.0E7…9.0E7
CONC1_CCF09 CONC1_CCF09 CONC1_CCF09 CONC1_CCF09
CONC1_CCF09
R/W Define non-linear equation if CCF09 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.4.9).
0.0
Settings:
-9.0E7…9.0E7
CONC1_CCF10 CONC1_CCF10 CONC1_CCF10 CONC1_CCF10
CONC1_CCF10
R/W Define non-linear equation if CCF10 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.4.10).
0.0
Settings:
-9.0E7…9.0E7
CONC1_CCF11 CONC1_CCF11 CONC1_CCF11 CONC1_CCF11
CONC1_CCF11
R/W Define non-linear equation if CCF11 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.4.11).
0.0
Settings:
-9.0E7…9.0E7
CONC1_CCF12 CONC1_CCF12 CONC1_CCF12 CONC1_CCF12
CONC1_CCF12
R/W Define non-linear equation if CCF12 is set to ''Non-Linear''.
Consult Service for settings (Fct. C2.4.12).
0.0
Settings:
-9.0E7…9.0E7
CONC1_ CONC1_ CONC1_ CONC1_
FUNCTION FUNCTION FUNCTION FUNCTION
Conc.1 Function
R/W Sets the concentration measurement required (Fct. C2.2.1). 1:Off
Settings:
1:Off / 2:Brix / 3:% Mass / 8:% Volume / 4:Baume 144 /
5:Baume 145 / 6:% NaOH / 7:Plato / 9:API / 10:% Alcohol by
mass / 11:% Alcohol by volume
CONC1_OFFSET CONC1_OFFSET CONC1_OFFSET CONC1_OFFSET
Conc.1 Offset
R/W Additional offset for the concentration measurement. Can be
used to correct for differences between the measured and the
reference value (Fct. C2.2.2).
0.0 %
Settings:
-100.0…100.0 %
CONC1_PRODUCT CONC1_PRODUCT CONC1_PRODUCT CONC1_PRODUCT
Conc.1 Product
R/W Defines which general concentration product is displayed (Fct.
C2.2.3).
0:% Of Product A
Settings:
0:% Of Product A / 1:% Of Product B
CONC2_CCF01 CONC2_CCF01 CONC2_CCF01 CONC2_CCF01
CONC2_CCF01
R/W Defines the whether the concentration measurement use the
linear or non-linear coefficients (Fct. C2.5.1).
0:Linear
Settings:
0:Linear / 1:Non Linear
CONC2_CCF02 CONC2_CCF02 CONC2_CCF02 CONC2_CCF02
CONC2_CCF02
R/W Density of product A (Fct. C2.5.2). 0.0 g/cm³
Settings:
-9.0E7…9.0E7 g/cm³
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value