KROHNE OPTIWAVE 7300C EN - Manual (Page 98)

8
TECHNICAL DATA
98
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000172405 - HB OPTIWAVE 7300 R07 en
Other standards and approvals Other standards and approvals Other standards and approvals Other standards and approvals
EMC Electromagnetic Compatibility Directive 2004/108/EC in conjunction with
EN 61326-1 (2013)
R & TTE Radio Equipment and Telecommunications Terminal Equipment Directive
1999/5/EC in conjunction with ESTI EN 302 372-1 (2011) and EN 302 372-2 (2011)
FCC Rules Part 15
Industry Canada RSS-210
LVD Low-Voltage Directive 2006/95/EC in conjunction with EN 61010-1 (2001)
NAMUR NAMUR NE 21 Electromagnetic Compatibility (EMC) of Industrial Process and
Laboratory Control Equipment
NAMUR NE 43 Standardization of the Signal Level for the Failure Information of
Digital Transmitters
WHG
Z-65.16-425
In conformity with the German Federal Water Act, §9
CRN This certification is for all Canadian provinces and territories. For more data, refer
to the website.
Construction code Option: NACE MR0175 / NACE MR0103 / ISO 15156
1 The device has a distance piece if it has the flange options that follow: DN100 PN100, DN150 PN63 or PN100, DN200 PN40, 6¨ in 300 lb,
3¨...4¨ in 600 lb, 3¨...4¨ in 900 lb, and 1½¨...2¨ in 900 lb or 1500 lb
2 This option is not available for FM- or CSA-approved devices
3 Hastelloy® is a registered trademark of Haynes International, Inc.
4 Tri-Clamp® is a registered trademark of Ladish Co., Inc. BioControl® is a registered trademark of Neumo-Ehrenberg-Group.
5 Kalrez® is a registered trademark of DuPont Performance Elastomers L.L.C.
6 Metaglas® is a registered trademark of Herberts Industrieglas, GMBH & Co., KG
7 HART® is a registered trademark of the HART Communication Foundation