KROHNE OPTIWAVE 7300C EN - Manual (Page 34)

3
INSTALLATION
34
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000172405 - HB OPTIWAVE 7300 R07 en
DIN 11851
Equipment needed:
• Device
• Gasket (not supplied)
• DIN 11851 nut
How to attach a device with a DIN 11851 connection
• Make sure that the tank connection is level.
• Make sure that you use the applicable gasket for the connection dimensions and the process.
• Align the gasket correctly.
• Lower the antenna carefully into the tank.
• Turn the nut on the device process connection to attach the device to the tank.
• Tighten the connection.
i Refer to local rules and regulations for the correct torque to apply to the connection.
Figure 3-19: DIN 11851 connection
1 Tank socket
2 Nut for DIN 11851 connection