Safety instructions, 1 software history, 2 intended use – KROHNE OPTIWAVE 7300C EN User Manual
Page 7
SAFETY INSTRUCTIONS
1
7
OPTIWAVE 7300 C
www.krohne.com
03/2014 - 4000172405 - HB OPTIWAVE 7300 R07 en
1.1 Software history
Data about software revisions is shown in the Supervisor menu. Go to Test > Information >
Test > Information >
Test > Information >
Test > Information >
Device ID
Device ID
Device ID
Device ID. For more data, refer to
Function description
on page 57. If it is not possible to refer to
the device menu, record the serial number of the device (given on the device nameplate) and
speak to the supplier.
1.2 Intended use
This radar level transmitter measures distance, level, mass, volume and reflectivity of liquids,
pastes and slurries.
It can be installed on tanks, reactors and open channels.
Release date
(back end)
[YYYY-MM-DD]
Back end
Front end
DTM revision
Hardware
NE 53 level
2006-10-31
1.0.1.95
1.0.0.26
1.0.0.32
2139580100
n/a
2008-02-01
1.01.96
1.0.0.27
1.0.0.34
2139580100
3
End of back end board ref. 2138270200 production
2010-03-01
2.0.2.00
1.0.2.00
1
1.0.0.28
1.0.0.35
4000659201
2
1
3
2010-05-01
2.0.2.01
1.0.2.01
1
1.0.0.28
1.0.0.35
4000659201
3
3
n/a
2012-03-05
2.0.2.02
1.0.2.02
1
1.0.0.28
1.0.0.36
4000659201
4
3
3
2012-03-05
2.0.2.03
1.0.2.03
1
1.0.0.28
1.0.0.36
4000659201
5
3
3
2013-01-22
2.0.2.04
1.0.2.04
1
1.0.0.28
1.0.0.37
6
4000659201
7
3
3
1 This back end firmware revision is only used for device upgrades
2 It is possible to upgrade the hardware (ref. 2139580100) with back end firmware revision 1.02.00
3 It is possible to upgrade the hardware (ref. 2139580100) with back end firmware revision 1.02.01
4 It is possible to upgrade the hardware (ref. 2139580100) with back end firmware revision 1.02.02
5 It is possible to upgrade the hardware (ref. 2139580100) with back end firmware revision 1.02.03
6 If your computer uses the Windows XP operating system, install DTM revision V 1.0.0.36. If your computer uses the Windows 7 operating
system, install DTM revision V 1.0.0.37.
7 It is possible to upgrade the hardware (ref. 2139580100) with back end firmware revision 1.02.04