KROHNE OPTIWAVE 7300C EN - Manual (Page 88)

7
SERVICE
88
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000172405 - HB OPTIWAVE 7300 R07 en
7.4.4 Replacement of the terminal module
Equipment needed (not supplied):
• 2.5 mm Allen wrench for Aluminium (painted) housings; 3 mm Allen wrench for Stainless
Steel housings (for step 1).
• Small slotted tip screwdriver (for step 3).
• TORX T10 wrench (for step 5).
• 2.5 mm Allen wrench (for step 6).
Figure 7-3: Removal of the terminal module