KROHNE OPTIWAVE 7300C EN - Manual (Page 58)

6
OPERATION
58
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000172405 - HB OPTIWAVE 7300 R07 en
A.1.3 A.1.3 A.1.3 A.1.3 Empty Spectrum Empty Spectrum Empty Spectrum Empty Spectrum Fixed and moving objects in the Fixed and moving objects in the Fixed and moving objects in the Fixed and moving objects in the
tank cause interference tank cause interference tank cause interference tank cause interference
signals. Put them through this signals. Put them through this signals. Put them through this signals. Put them through this
filter to correctly measure the filter to correctly measure the filter to correctly measure the filter to correctly measure the
tank contents. tank contents. tank contents. tank contents.
1 Do you have a
completely filled
tank?
If the tank is full, it is not
possible to complete this
procedure. The tank must be
partially filled or empty.
Yes, No Yes
2 Are all moving
parts in the tank,
e.g. agitators, in
motion?
We recommend that you switch
on agitators and other moving
equipment to filter all
interference signals.
Yes, No Yes
3 Is your tank
partially filled or
empty?
If the tank is partially filled, the
device must include the tank
contents when it filters the
signal.
Partially Filled, Empty Partially
Filled
4 Distance If the tank is partially filled,
type in a distance shorter than
that between the flange and
the tank contents.
min-max:
0…tank height
10 m /
32.808 ft
5 Do you want to
consider Average
or Maximum value
for recording?
Use the average value for tanks
which contain fixed objects
only. Use the maximum value
for tanks which contain many
objects or moving objects.
Average, Maximum Average
6 Empty spect.
recording is in
progress
… … …
7 Empty spectrum
graph
… … …
8 Do you want to
save the
spectrum?
If you save this data, the device
will use it when it measures
the tank contents.
Save, Cancel 3 Save
A.1.4 A.1.4 A.1.4 A.1.4 Conversion Conversion Conversion Conversion Follow this procedure to set Follow this procedure to set Follow this procedure to set Follow this procedure to set
the device up to display the device up to display the device up to display the device up to display
readings in volume, mass or readings in volume, mass or readings in volume, mass or readings in volume, mass or
user-defined units. user-defined units. user-defined units. user-defined units.
Sub-
menu
Conversion
submenu [Volume] [Volume] [Volume] [Volume]
1 Do you want to use
free unit?
Select "No". Yes, No No
2 Table Length Unit m, cm, mm, inch, ft, Free
Unit
m
3 Please select
Volume / Mass
Select "Volume". Volume, Mass
5 Tank Shapes This sub-procedure uses the
information given here to find
the volume. You have to type in
the tank shape, height, width
and length.
... ...
6 Conversion Unit The displayed unit in operator
mode.
m3, L, US gal, GB gal, ft3,
bbl
m3
7 Volume Table A table that converts product
level to product volume.
Push[ ] or [ ] to select a line
and push [>>>>] to change values
automatically supplied by the
device.
Menu
No. Step Function Function description Selection list Default