KEPCO BHK-MG 200W (Full Rack) Series - Manual (Page 21)

BHK-MG (OPR) 022014
1-5
GENERAL (ENVIRONMENTAL) CHARACTERISTICS
Temperature Operating 0° to +50° C
Storage -20° to +70° C
Humidity
0 to 95% RH
Non condensing
operating & storage
Shock 20g, 11msec ±50%
half sine
Non operating, 3-axes,
3 shocks each axis
Vibration 5-10Hz 10mm
double amplitude
Non operating, 3-axes,
1 hour each axis
Cooling Built-in Fan, exhaust air to rear
PHYSICAL CHARACTERISTICS
Dimensions See Figure 1-2.
Weight English 45 lbs. Unpacked
Metric 20 Kg
a-c source connections Front Circuit Breaker, 2-pole
Rear Detachable IEC 3-wire
type connector
Interlock switch, 1-pole
Interlock switch monitors plastic cover
over rear panel terminals.
d-c output terminals Rear panel Terminal Block (11 posi-
tions),
±Output, ±Sense, Ground, Internal Capac-
itor (–), Grounding Network
Front panel Jacks (2) ±Output
Control Local: Digital control using front panel keypad(24 pads) and LCD
Remote: Digital control using rear panel IEEE 488 Bus (24 pin female connec-
tor). Analog control using two rear panel terminal strips (10 positions)
for voltage and current
Digital display
front panel Voltage, current, mode,
settings, menu, program,
etc. 2 x 16 character alphanumeric LCD with
LED backlight
TABLE 1-2. BHK-MG 200W SPECIFICATIONS (Continued)
SPECIFICATION RATING/DESCRIPTION CONDITION