Jenway 3540 - Manual (Page 68)

An example screen of stored results
To review stored results use the right or left arrow key to highlight the Results tab.
See section 3.3 for details of the alternative actions that can be taken when the
memory is full and for the various functions of the clear [CLR] key. Results can be
transmitted to a PC by pressing the print key.
7.5 Salinity
Measurement
The correlation between conductivity and salinity is defined in ?????
To display the Salinity value with its equivalent conductivity press the up or down
arrow when the Cond tab is highlighted to change the tab indication from Cond to Sal.
Each channel has its own endpoint indicator and the reading for individual channels
should not be recorded until its endpoint indicator is displayed.
Salinity value in g/l displayed below its equivalent conductivity
Results can be stored in the internal memory using the powerful data logging
functions, see section 3.3. Simply pressing the Store [STO] key will save the result to
the next available location along with the date, time and any batch code entered in
the set up menu. Alternatively the data logging function can be set to automatically
store or print the results when the endpoint indicator is displayed saving any
intermediate key press between samples.
To review stored results use the right or left arrow key to highlight the Results tab.
See section 3.3 for details of the alternative actions that can be taken when the
memory is full and for the various functions of the clear [CLR] key. Results can be
transmitted to a PC by pressing the print key.