Jenway 3540 User Manual
Page 48
5.10 pH
Resolution
The pH display can be set to have a resolution of 0.1pH, 0.01pH or 0.001pH
depending on your application and regulatory/reporting requirements. To change the
displayed resolution press the down arrow key in the pH Set Up menu to highlight pH
Resolution, then press the Enter key. The current setting will be highlighted, use the
up and down arrow keys to cycle through the three options detailed above.
Select required pH resolution using up or down arrow keys
When the desired resolution is highlighted on the display press the Enter key to
confirm your selection. Press the Escape [ESC] key to return to other menu levels or
continue with the pH set up as follows.
5.20 mV
Resolution
The mV display can be set to have a resolution of 0.1mV or 1mV depending on your
application and regulatory/reporting requirements. To change the displayed resolution
press the down arrow key in the pH Set Up menu to highlight mV Resolution, then
press the Enter key. The current setting will be highlighted, use the up and down
arrow keys to toggle between the options detailed above.
Select 1mV or 0.1mV resolution
When the desired resolution is highlighted on the display press the Enter key to
confirm your selection. Press the Escape [ESC] key to return to other menu levels or
continue with the pH set up as follows.