Jenway 3540 - Manual (Page 18)

3.10 Instrument Set Up
The Instrument Set Up menu contains options for selecting the operating language
and adjusting the brightness of the display to compensate for adverse lighting
situations.
Access the Instrument Set Up menu by carrying out paragraphs 3.01 to 3.05, then
use the up or down arrow keys [ ] to move the highlight over the Instrument Set Up
option then press the Enter key [ ]. The Instrument Set Up screen below will be
displayed…
Instrument Set Up screen
3.11 Language
Options
The model 3540 is supplied with two operating languages as standard. English is the
default language with the alternative being selected at the time of purchase from
French, German, Italian or Spanish.
To change the language on the display press the down arrow to highlight the
Language option in the Instrument Set Up screen, then press the Enter key. The
highlight will move across to the default language of ‘English’ or the alternative if this
has been previously changed. Use the up or down arrow keys to toggle between the
two language options and press the Enter key to accept your preferred alternative
and return the highlight to the left-hand side of the menu. Use the Escape key to
return to other menu levels or continue with setting the LCD brightness as below.
General Set Up screen displayed in French
3.12
LCD Brightness %
The display brightness is optimised for a wide range of lighting conditions, should
installation in an area with unusual lighting requirements be necessary the display
brightness can be adjusted to ensure clarity is maintained. The value displayed for
the brightness is a percentage of the maximum, with 100% being the brightest and
0% being the darkest. At both extremes the contrast is such that the display can still
be read. The default value of 50% should give optimum brightness in normal
conditions.