Jenway 3540 - Manual (Page 27)

To change the clear key function, press the down arrow to highlight ‘Clr Key’ in the
Data Logging Set Up screen, then press the Enter key. The highlight will move across
to the default setting of ‘Disabled’ or an alternative from the above if this has
previously been changed.
With Clear key function set as ‘Deletes results Before’ a further key press will delete all results before the highlight
Use the up or down arrow keys to review the options and press the Enter key to
accept your preferred setting when this is highlighted on the display.
Use the Escape key to return to other menu levels or continue with setting the other
data logging options as below.
3.37 Printer
Set up…
The printer set up has a separate sub-menu that can be accessed by pressing the up
or down arrow keys to highlight Printer set up… in the Data Logging Set Up screen,
then pressing the Enter key. The Printer Set Up screen has options for setting the
Baud rate of the transmission as well as the channel(s) printed.
Printer Set Up screen
3.38 Baud Rate
To set the Serial Printer Baudrate press the down arrow key to highlight the Serial
Printer Baudrate option on the Printer Set Up screen, then press the Enter key. The
highlight will move across to the default setting of ‘9600’ or ‘1200’ if this has
previously been changed. Use the up or down arrow keys to toggle between the
options and press the Enter key to accept your preferred setting when this is
highlighted on the display. Use the Escape key to return to other menu levels or
continue with setting the other printer set up options as below.