Jenway 3540 - Manual (Page 40)

To enable the alarms and set the relevant high and low alarm levels press the down
arrow key in the Conductivity Set Up menu to highlight Alarms Set Up…
Conductivity Set Up menu – Alarms Set Up highlighted
Press the Enter key to display the Alarms Set Up menu as below…
Alarms Set Up Menu
4.21 Alarm Outputs
This option enables or disables all of the alarm functions and overrides the audible
alarm warning that can be separately disabled/enabled only when this function is
enabled.
To change the Alarm Outputs setting press the down arrow key to highlight Alarm
Outputs in the Alarms Set up menu then press the Enter key. The highlight will move
to the current setting. Use the up or down arrow keys to toggle between Disabled (the
default setting) and Enabled, press the Enter key to select your preferred setting
when it is highlighted on the display. Then use the ESC key to return to other menu
levels, the main measurement screen or continue with the alarms settings as follows.
4.22 Audible Alarm Warning
With the Alarm Outputs enabled the internal audible alarm can be separately enabled
or disabled so as not to be intrusive when not required or to complement the visual
alarm bell icon when necessary.
To change the Audible Alarm Warning setting press the down arrow key to highlight
Audible Alarm Warning in the Alarms Set up menu then press the Enter key. The
highlight will move to the current setting. Use the up or down arrow keys to toggle
between Disabled (the default setting) and Enabled, press the Enter key to select
your preferred setting when it is highlighted on the display. Then use the ESC key to
return to other menu levels, the main measurement screen or continue with the
alarms settings as follows.