Jenway 3540 - Manual (Page 11)

Section 2
Getting Started
2.1 Unpacking
Remove the 3540 from the packaging and ensure the following items are included:
1. Model 3540 pH/Conductivity Meter
2. Glass bodied combination pH electrode (924 005)
3. Epoxy bodied Conductivity Cell K=1 (027 013)
4. ATC probe (027 500)
5. Electrode Holder
6. 4, 7 & 10 pH buffer sachets
7. BNC shorting plug (009 146)
8. Power supply (as specified at the time of ordering)
9. Condensed operating instructions (354 051)
10. Operating Manual (354 050)
Any shortages or damage must be reported to your local distributor or the
manufacturer as soon as possible.
Typical Items supplied
Keep all packing materials in case the unit has to be re-shipped at a later date. It is
important that when re-packing the instrument it is first placed in a sealed polythene
bag.
2.2 Installation
2.21 Location
The Model 3540 must be positioned within 1.5 meters of an electric supply socket.
In ideal circumstances the installation environment will be clean, dry and dust free.
Where conditions are less than ideal, maintenance and cleaning must be carried out
regularly and additional protection offered, where possible. The optional dust cover
should always be fitted when the unit is not being used or is stored for short periods.