In-Situ Win-Situ 2000 Operators Manual - Manual (Page 37)

33
0024690 rev. 002 09/00
SECTION 10: TEST DATA FILES
TO CHANGE PRESSURE/LEVEL SETTINGS
The data file is initially displayed using the settings specified when
setting up the pressure channel. Refer to Section 5 for details on the
settings.
1. Select Pressure from the Settings Menu, or click .
2. In the Pressure/Level Settings dialog box, change any or all of the
settings:
• Reading Type: pressure head, depth, or level
• Pressure to depth/level conversion using specific gravity
or using density, latitude & elevation
• Barometric compensation for HERMIT 3000 channels
• Level reference
• Time at which the reference reading is/was taken
3. Click OK to accept the changes and return to the data display. (The
Channel Defaults button restores the original settings.)
GRAPHING DATA
Select the Graph option on the View Menu to view the data file in
graph format or click .
A check here means
the reference
reading will be set to
the pressure head of
the first measure-
ment. If you
originally chose to
take the reference
reading “at start of
test,” this option is
not available.