Device node – In-Situ Win-Situ 2000 Operators Manual User Manual

Page 14

0024690 rev. 002 09/00

Connection Actions

Edit Connection starts the Connection Wizard to help you change the
properties of a connection.

Connect opens the connection and locates devices. After the
connection is made, this button changes to let you Disconnect from
the device.

You can Delete or Edit a connection by choosing the appropriate
action button.

Find Devices is a shortcut to get Win-Situ to display new devices in
the tree without having to disconnect and re-connect.

DEVICE NODE

With a device selected, the Information pane shows device details: the
date it was manufactured and calibrated, its hardware and firmware
versions, storage capacity (memory), battery status (based on measured
voltage), the device clock, and more. The example below is for a
MiniTROLL.

Device Actions

Edit Device Info—Depending on the device type, you can set a custom
name and change other settings. For more info see page 15.

Set Device Clock—For details, see page 15.

Refresh Device Info—to update the display.

SECTION 3: THE WIN-SITU ENVIRONMENT

Node

Actions

Information

Device clock