In-Situ Win-Situ 2000 Operators Manual - Manual (Page 34)

30
0024690 rev. 002 09/00
SECTION 9: TEST OPERATIONS
DELETING TESTS
Tests are stored in the device memory until you delete them. This
operation permanently removes selected tests from the device, and
reorganizes the memory to optimize future data storage. Depending on
how full the memory is, the process can take several minutes.
1. Navigate to the device’s Tests node.
2. In the Information pane, select one or more tests to delete.
3. Press the Delete Tests button.
4. Click Yes to confirm your selection.
5. Win-Situ will delete the selected test(s) permanently from the
device.
CAUTION: Be sure to extract data you want to save before
deleting from the device. Once a test is deleted, the data
cannot be retrieved!
TIP: The Delete procedure can be used to cancel a
pending scheduled test.
Win-Situ \ Data \ SN00120 2000-01-18 083000 drawdown.bin
Device serial number
Test start date (yyyy-mm-dd)
Test start time (hhmmss)
Test name
TIP: Win-Situ saves each test to a folder named “Data” in
the folder where Win-Situ is installed. The file structure
looks like this:
File type
TIP: “Extracting” puts a copy of a test data file on your
computer, but does not delete the data from the device. To
free up device memory, see Deleting Tests.